Products

Rear light harness, Ford Bronco (2021) (requires #6592 lighting power module and #6593 distribution block)

Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Body, Rustler®, Hawaiian graphics (painted, decals applied)

Mount, telemetry expander (fits Rustler®, Bandit®, Slash 2WD)

Nuts, 3mm nylon locking, flanged, black (8)

Nuts, 3mm nylon locking, black (8)

3S LIPO COMPLETER 2872X/2985

Traxxas Grille, Chevrolet Corvette Stingray/ grille mount (3)/ headlight housing (2)/ lens (2)/ headlight mount (2)/ 2.6x6mm BCS (4)/ 2.6x8mm BCS (8)

Body, Toyota Supra GT4 (clear, trimmed, requires painting)/ decal sheet (includes side mirrors, wing, grilles, vents, hardware, & clipless moun...

Officially Licensed Ford® Mustang Body Clipless body eliminates body post holes Injection molded details Grille, splitter, hood vents, side m...

Officially Licensed Ford® Mustang Body Clipless body eliminates body post holes Injection molded details Grille, splitter, hood vents, side m...

Wheelie bar mounts/ rear skidplate (fits 4WD Stampede®) (for LED light kit installation)

Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replac...

The High Torque Maxx Servo is the ultimate steering upgrade for your X-Maxx®, XRT®, or Maxx®. With a staggering 650 ounce-inches of torque and full...

Turnbuckles (72mm) (Tie rods or optional rear camber rods) (2)

Servo case, aluminum (black-anodized) (middle) (for 2275 servo)

These are the optional aluminum turnbuckles for the Traxxas Rustler.Features: Aluminum construction that’s anodized in greenIncludes: Two assemb...

These are the optional aluminum turnbuckles for the Traxxas Rustler.Features: Aluminum construction that’s anodized in orangeIncludes: Two assem...

These are the optional aluminum turnbuckles for the Traxxas Rustler.Features: Aluminum construction that’s anodized in pinkIncludes: Two assembl...

Traxxas optional turnbuckle set for the Traxxas, Rustler and Stampede. Constructed of anodized green aluminum with black nylon ball ends. This pack...

Traxxas optional turnbuckle set for the Traxxas, Rustler and Stampede. Constructed of anodized orange aluminum with black nylon ball ends. This pa...

Traxxas optional turnbuckle set for the Traxxas, Rustler and Stampede. Constructed of anodized pink aluminum with black nylon ball ends. This pack...

Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a ...

Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a ...

Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a ...

Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a ...

Winch fairlead for use with TRX4 front bumper model 8865, 8866, 8867, 8869, or 9224. Accessory part for these models: TRX-4 1979 Chevrolet Blazer ...

Winch fairlead for use with TRX4 front bumper model 8865, 8866, 8867, 8869, or 9224. Accessory part for these models: TRX-4 1979 Chevrolet Blazer ...

Winch fairlead for use with TRX4 front bumper model 8865, 8866, 8867, 8869, or 9224. Accessory part for these models: TRX-4 1979 Chevrolet Blazer ...

Winch fairlead for use with TRX4 front bumper model 8865, 8866, 8867, 8869, or 9224. Accessory part for these models: TRX-4 1979 Chevrolet Blazer ...

Winch fairlead for use with TRX4 front bumper model 8865, 8866, 8867, 8869, or 9224. Accessory part for these models: TRX-4 1979 Chevrolet Blazer ...

Ball bearing kit, transmission, black rubber sealed (contains 3x6x2.5mm bearings (6))

Traxxas BALL BEARING SS BLK 5X11X4 (2) Specs:Inside diameter: 3/16" (5mm).Outside diameter: 7/16" (11mm)Width: 5/32" (4mm) Includes: (2) 5X11mm bal...

Ball bearings, black rubber sealed (6x10x3mm) (2)

The Bandit™ VXL is a low-slung, lightweight speed machine that scorches pavement with wheelie-popping acceleration and rips incredible roost off-...

Bellcrank bushing, steering (1) (for use with #7746 aluminum steering bellcranks)

The Traxxas® Bigfoot® 1/10 RTR 4WD Brushless Monster Truck (50th Anniversary Edition) celebrates 50 years of the legendary BIGFOOT monster truck wi...

Unleash the legend with the Traxxas "Bigfoot" No.1 HD Original RTR 1/10 2WD Monster Truck—designed for unparalleled durability and thrilling off-ro...

Toe links, front (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit and XRT )

Toe links, 202.5mm (187.5mm center to center) (black) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Toe links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit and XRT)

Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW (2)