Car & Truck Parts

HPI Racing spare plastic parts set for the Cam Type Servo Saver. Constructed of black plastic. This product includesOne steering bellcrank plastic ...

This is the Stock Replacement Front and Rear Bumpers for the Sprint RTR. These are located in the front and rear of the vehicle. Features: Black ny...

HPI Racing shock body set for use with the HPI Firestorm nitro stadium truck are direct replacement parts. Constructed of black nylon and threaded ...

HPI Racing shock body set for use with the HPI Firestorm nitro stadium truck are direct replacement parts. Constructed of black nylon and threaded ...

These are replacement wheel adapters for the HPI Sprint.Features: Black Plastic Wheel AdaptersIncludes: Four Adapters 12mm Four Pins Four 4mm Lock...

HPI Racing two replacement suspension arms are constructed of black plastic.This product includes one front suspension arm and one rear suspension ...

HPI Racing servo horn slide carburetor. This servo horn set for use with slide valve carbureted engines. This set is used on the HPI Nitro 3, Nitro...

HPI Racing upright set is constructed of black plastic, (2 Front and 2 Rear). Tree includes 2 front uprights, 2 rear uprights, and 2 knuckles. Requ...

HPI Racing rear hub set is constructed of black nylon. This set has two different toe-in hub sets. Includes: Two 1º hubs. Two 2º hubs. Specs: T...

HPI Racing stock replacement support set are constructed of black nylon. These parts are specific to the RTR Nitro RS4 3. Includes: One brake disk...

HPI Racing stock replacement shock tower and bumper set are constructed of black nylon. Includes: One front bumper One front shock tower One rear ...

HPI Racing stock replacement suspension arm set is constructed of black nylon. Includes: One front suspension arm. One rear suspension arm. Two 12...

HPI Racing optional 20 Tooth pinion gear is constructed of steel.This package includesOne 32 pitch, 20 tooth pinion gear (the model requires two pi...

HPI Racing Sprint RTR pulley set are two stock replacement 15 Tooth pulleys for the Sprint. These pulleys rotate under the drive belt. HPI Sprint R...

HPI Racing stock replacement Sprint RTR battery holder set. This part holds the 6 cell stick pack onto the chassis.HPI stock replacement battery ho...

This is the 6 cell Battery Holder Set from HPI for use with the E-Savage. Features: Black nylon construction Direct replacement parts Includes: On...

HPI Racing bumper set is a replacement front and rear bumper set for the E-Savage Series. HPI bumper set is a replacement front and rear bumper set...

HPI Racing replacement large and small drive bevel set is constructed of steel. Replaces worn or damaged bevel gears. The E-Savage model has two of...

HPI Racing pair of flanged shafts for the HPI E-Savage Trucks. These hold the hubs to the lower suspension arms. Constructed of steel. Specs: Lengt...

HPI Racing optional 21 Tooth pinion gear is constructed of steel.This package includes One 32 pitch, 21 tooth pinion gear (the model requires two p...

HPI Racing replacement suspension arm set is constructed of composite nylon and black in color. Replaces worn or damaged suspension arms. Includes:...

This is the gear box set for the HPI E-Savage.Features: Plastic construction that is black in color Holds all of the internal gears Includes: Gea...

HPI Racing replacement 66 Tooth spur gear is constructed of composite nylon and black in color. Replaces a worn or damaged spur gear. This package...

This is the replacement Center Gear Set for the HPI E-Savage Series. Features:Nylon construction, black in color Replaces worn or damaged gear sets...

HPI Racing 13 Tooth racing clutch bell is constructed of steel. Requires: HPI Nitro Star Engine Specs: Length: 0.78" (19.90mm)Diameter: 1.1" (28.1...

Spur Gear 38 Tooth/Savage 3 Speed/Spare 87218/87220

HPI Racing replacement shock end and rod end parts set is constructed of composite nylon and black in color. This package includes Four Lower Shock...

This is the pinion gear for the 3-speed transmission used in the HPI Savage series.Features: Constructed of hardened steelIncludes: One pinion gear...

This is the 21-tooth pinion gear for the HPI Savage.Features: Steel constructionIncludes: Pinion gear Three 2.5x12mm pins Requires: Installing i...

HPI Racing aluminum threaded pinion gear will fine-tune the Nitro RS4-3 two speed transmission with this threaded pinion gear. Color-coded for easy...

This is the stock replacement spur gear for the HPI Savage .21 truck. This is the main gear that meshes with the clutchbell.Features: Black plastic...

This is the two speed spur gear for the HPI Savage SS truck.Features: Black plastic construction 49 tooth spur gear Red rubber spacer Includes: O...

HPI Racing stock replacement transmission gearis constructed of nylon and black in color with 44 teeth. The C-Clips require snap ring pliers to be ...

This is the 47T spur gear for the HPI Savage .25.Features: Black plastic constructionIncludes: One 47T spur gear One clutch pad

This is the heavy duty 52-tooth spur gear for the HPI Savage.Features: Steel construction that is black in color Replaces a worn or damaged spur g...

This is a 47 tooth 2-speed spur gear by HPI for the Nitro 3. It replaces old or worn 2-speed spur gears.Features: Hard plastic construction that is...

HPI Racing heavy duty 47 Tooth spur gear used as original equipment on the Savage X SS, this steel 47 Tooth Heavy Duty Spur Gear is an excellent up...

This is the 49 tooth spur gear for the HPI Savage X.Features: Constructed of hardened plasticIncludes: 49 Tooth Spur Gear with two fiber gasketsReq...

HPI Racing package of four pivot balls for the RS4 Pro 4. These pivot balls fit onto the ends of the suspension shafts.HPI pivot balls are construc...

This is the replacement 39 tooth transmission gear for the HPI heavy-duty transmission gear set for the Savage.Features: Composite nylon construct...

HPI package of four ball studs, 4.3x13mm, for the RS4 Pro 4. This is a package of 4.3X13mm ball studs for the HPI RS4 PRO4. HPI ball stud is constr...

HPI Racing package of eight 7x11x2mm O-Rings for the HPI Savage XL. Constructed of black silicone. These o-rings could be used in any application r...

HPI Racing solid drive is constructed of black plastic. Requires: Installation following the model manual

This is the HPI Servo Arm Set for Micro RS4.Includes: #1-Front Diff Housing #2-Wrench #3-Ends from Diff #4-Part of u-joint #5-Sterring Column #6-...

This is the HPI Bumper Set for the Micro RS4 Series.Features: Black colored Made of durable material For the HPI Ken Block, Subaru WRX, 1969 Ford M...

HPI Racing right section of the main chassis for the Savage X is constructed of aluminum. Specs: Length: 12.25" (311mm)Thickness: 0.098" (2.5mm)Hei...

HPI Racing left section of the main chassis for the Savage X is constructed of aluminum. Requires: Installation on Savage X Specs: Length: 12" (305...

This is the HPI Grey Aluminum Main Chassis Set for the Savage XL.Includes: One HPI Grey Aluminum Main Chassis Set (2 pieces)Requires: Installation ...