Car & Truck Parts

Sway Bar (2.8mm) Vorza Flux

Brake Wire, (2pcs)

This is the HPI 48T Spur Gear for the Hot Bodies D8 Buggy. Features: Black colored Made of steel 48 Tooth For the HPI Vorza Flux and D8S Includes...

These are the HPI Brake Cams for the D8S and Hot Bodies D8T.Features: Silver colored Made of steel For the HPI D8S and Hot Bodies D8T Includes:Two ...

This is the HPI Rear Inner Suspension Shaft for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Black colored Made of steel For the H...

These are the HPI 4x71mm Suspension Pins for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Silver colored Made of metal For the HPI...

This is the HPI Racing Body Mount Set for the Vorza Flux and Hot Bodies D8.Features: Black colored Composite construction For the HPI Vorza Flux an...

Universal Joint Rebuild Kit, Vorza Flux

This is a pair of HPI White Big Bore Shock Springs for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: White colored Made of steel 60...

This is a pair of HPI Grey Big Bore Shock Springs for the D8S, Vorza Flux, Apache SC, and Apache C1.Features: Grey colored Made of steel 60mm/74gf...

This is a pair of HPI 8x14x4mm Ball Bearings for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Silver colored Made of metal For the...

These are the HPI Big Bore Shock Bodies for the D8S, Vorza Flux, and D8T.Features: Grey colored Made of aluminum For the HPI D8S, Vorza Flux, and H...

This is a pair of HPI Right/Left Front Spindles for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Black colored Made of nylon For t...

These are the HPI Big Bore Shock Caps for the D8S, Vorza Flux, Apache SC/CI, D812, and D8T.Features: Grey colored Made of aluminum For the HPI D8S...

These are the HPI Rear Outer Suspension Shafts for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Black colored Made of metal For th...

This is the HPI Front Suspension Block for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Grey colored Made of aluminum For the HPI ...

This is the HPI 3 Degree Rear Pivot Plate for the D8S, Vorza Flux, and D8T.Features: Grey colored Made of aluminum For the HPI D8S, Vorza Flux and...

This is the HPI Front Shock Tower for the Vorza Flux and D8S.Features: Silver/grey colored Made of aluminum For the HPI Vorza Flux and D8S Includ...

This is a pair of HPI Shock Stand Offs for the Vorza Flux, D8S, Apache SC, Apache C1, and D8T.Features: Black colored Made of steel For the HPI Vo...

This is the HPI Rear Shock Tower for the Vorza Flux, D8S, Apache SC, and Apache C1.Features: Gun metal colored Made of aluminum For the HPI Vorza ...

Steering Plate, Vorza Flux

Shock Mount Screw, X2 CW/ X2 CCW, Vorza Flux

This is the HPI Front Hinge Pin Plate for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Grey colored Made of metal For the HPI D8S,...

This is a set of four HPI King Pin Bushings for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Black colored Made of steel For the H...

This is the two piece HPI 6x65mm drive shaft set. It is for the HPI Savage XS vehicle.

This is the HPI 46T Spur Gear for the WR8 and WR8 Flux.Features: Black colored Metal construction For the HPI WR8 and WR8 Flux Includes:One HPI 4...

This is the HPI Front Hub Carrier Set for the D8S, Vorza Flux, Apache SC, Apache C1, and D8T.Features: Black colored Made of nylon For the HPI D8S...

This is the HPI Rear Suspension Arm Set for the D8S and Vorza Flux.Features: Black colored Made of nylon For the HPI D8S and Vorza Flux Includes:...

Steering Ball End, 6.8mm, (4pcs)

Rear Chassis Stiffener

This is the HPI 3 Degree Pivot Plate for the Vorza Flux, D8S, Apache SC, Apache C1, and D8T.Features: Grey colored Made of metal For the HPI Vorza...

Servo Horn Set

HPI precut gray foam bumper is constructed of hard foam. Pre-cut post holes. This bumper fits the following vehicles: Nitro RS4, Nitro RS4 2, Nitro...

Shock End/Shock Spring Retainer Set, Vorza Flux

This is the HPI 4mm Hard Anodzied Main Chassis for the D8S.Features: Grey colored Made of metal For the HPI D8S Includes:One HPI 4mm Hard Anodzied ...

This is the HPI Shock Boot Set for the Vorza Flux, D8S, Apache SC, Apache C1, and D8T.Features: Black colored Made of rubber For the HPI Vorza Flu...

This is a pair of HPI 3x46mm Shock Shafts for the Ken Block 2013 GRC WR8 Flux and WR8 3.0.Includes: Two HPI 3x46mm Shock Shafts, (2) Features: Si...

Center Differential Shaft, 5X31mm, Rear, (1pc)

HPI 5mm package of eight concave washers for the Baja 5B are constructed of silver colored aluminum. Features: Concave-shaped washer designed for u...

This is the HPI 5x26.5mm Front Center Differential Shaft for the Ken Block 2013 GRC WR8 Flux and Ken Block 2013 GRC WR8 3.0.Includes: One HPI 5x26....

These are the HPI Hub Carriers for the Switch on-Road Cars.Features: Black colored Made of durable material For the HPI Switch on-Road Cars Inclu...

Servo Saver Parts

Body Post Set

Charge your LiPo batteries with complete confidence using the HPI Plazma Pouch LiPo Safe Case!The HPI Plazma Pouch Safe Case is the ultimate protec...