E-flite Extra 330 SC 3D 1.3m BNF Basic Introduction

For three decades, full-scale Extra aircraft have delivered incredible aerobatic performance with virtually unlimited potential. Variants have been flown to first place finishes in a long list of competitions, including at the recent world championships. That's why Jim Bourke – the creator of RCGroups.com and owner of Knife Edge Software that originally developed the RealFlight RC simulator – chooses to fly an Extra 330SC in airshows and competitions around the world. The E-flite® Extra 330SC 3D 1.3m is a replica of Jim's airplane that features his unique and iconic trim scheme. It's an updated and upgraded version of the Extra 300 3D 1.3m that delivers unbelievable sport flying, aerobatic, and 3D capabilities for intermediate to experienced pilots. It features digital, metal-geared servos, plus a 3S and 4S compatible power system now including an 85A Spektrum Avian Smart Lite ESC. The BNF Basic version is also equipped with an AR631 receiver to deliver real-time telemetry data along with AS3X and SAFE Select technologies that make it even easier to fly!

E-flite Extra 330 SC 3D 1.3m BNF Basic Overview

The E-flite Extra 330SC 3D 1.3m offers nearly unlimited aerobatic and 3D performance potential – even beyond that of the full-scale design! It's a replica of the airplane that Jim Bourke flies in airshows and competitions around the world, including his unique and highly visible trim scheme. It's also an updated and upgraded version of the Extra 300 3D 1.3m that features a larger hatch and opening with plastic edges to eliminate paint chipping when more easily installing/removing 3S or 4S 2200mAh to 3200mAh batteries. The strengthened motor mount better secures the brushless outrunner motor that's equipped with a lightweight wooden propeller to deliver outstanding thrust and vertical performance, along with extremely crisp throttle response thanks to the upgraded 85-amp Spektrum Avian Smart Lite ESC. Its fully molded EPO airframe is composite reinforced for an outstanding blend of rigidity and durability while also being as lightweight as possible. And the wire landing gear has been replaced with much stronger aluminum gear to make it even more durable! Plus, fast and precise factory-installed digital, metal-geared servos with ball-link equipped linkages drive the oversized control surfaces to deliver incredible 3D and precision flight capabilities. So whether you fly it mild to hone your sport or precision aerobatic flying skills or fly it wild to learn or perform the most aggressive 3D maneuvers, the Extra 330SC 3D 1.3m will offer unexpected levels of capability and performance you'll enjoy flight after flight.

E-flite Extra 330 SC 3D 1.3m BNF Basic Features

  • Popular 3S and 4S 2200–3200mAh batteries deliver excellent performance and flight times
  • Compatible with the Spektrum DXS transmitter included with many of the most popular E-flite and HobbyZone trainer airplane models
  • Easier to fly with innovative and optional-use SAFE Select flight envelope protection
  • The unmatched stability and locked-in feel of exclusive AS3X technology
  • Four factory-installed digital and metal-geared servos with ball-link-equipped linkages
  • Oversized control surfaces for maximum 3D aerobatic capability and performance
  • Lightweight yet durable, composite-reinforced construction with EPO material
  • Factory-finished with Jim's vivid paint scheme and bold graphics
  • More durable aluminum landing gear with wheel pants
  • Two-piece plug-in wings with carbon fiber wing tube
Skill Level 2 for the E-flite Extra 330 SC 3D 1.3m BNF Basic
Skill Level 2 – Some Experience Required

Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the skills to assemble, set up, and fly similar class models. And although this is one of the easiest to fly Extra models yet, it's not a suitable first-ever RC aircraft for new pilots or “next step after a trainer” model for low-time pilots. You should have the experience and skills necessary to successfully fly other aerobatic capable models like the E-flite T-28 Trojan 1.1m, Timber X 1.2m, Decathlon RJG 1.2m, Commander mPd 1.4m, or other similar models before attempting to fly the Extra 330SC 3D 1.3m.

Smart Technology for the E-flite Extra 330 SC 3D 1.3m BNF Basic
Smart Technology

The exclusive Spektrum Avian Smart Lite ESC provides a variety of real-time power system-related telemetry data including overall battery voltage, current draw, motor RPM, and more – with both Smart and non-Smart batteries – via compatible receivers (including the AR631) and Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly.

Abundant Power for the E-flite Extra 330 SC 3D 1.3m BNF Basic
Abundant Power

The included brushless power system features an 85-amp Smart Lite ESC and an outrunner motor equipped with a lightweight wooden propeller that deliver an abundance of scale-like power with 3S batteries, or unlimited vertical performance with 4S 2200–3200mAh batteries. Plus, the motor mount has been strengthened to better handle every power-on flight load possible.

Durable Precision for the E-flite Extra 330 SC 3D 1.3m BNF Basic
Durable Precision

Construction with lightweight yet durable, composite-reinforced EPO material ensures the best possible flight performance while the factory-installed digital, metal-geared servos and ball-link equipped linkages deliver precise control of the oversized control surfaces whether you're performing sport, precision, or aggressive 3D aerobatic maneuvers.

Authentic Appearance for the E-flite Extra 330 SC 3D 1.3m BNF Basic
Authentic Appearance

In addition to the scale outline, this replica is also appointed with a clear canopy and a detailed cockpit that features an instrument panel and a painted pilot figure. Plus the now more durable aluminum landing gear is equipped with fairings and wheel pants that add to the great looks and authentic scale appearance.

Jim Bourke Trim Scheme for the E-flite Extra 330 SC 3D 1.3m BNF Basic
Jim Bourke Trim Scheme

Factory-finished in the unique and iconic trim scheme featured on the full-scale Extra 330SC that Jim Bourke – the creator of RCGroups.com and owner of Knife Edge Software that originally developed the RealFlight RC simulator – flies in airshows and competitions around the world.

$include('Page-Include', 'cid', 'spektrum-bnf-blue-box')$

E-flite Extra 330 SC 3D 1.3m Video